INNOluxe ReBond V3 can be added to every colour each time you use it.

It’s important to use Balance Plus V3 each time you rinse or shampoo off your colour.

For double or multiple applications, only leave Balance Plus V3 on for 5 minutes in between colours, but always leave Balance Plus V3 on for 10 minutes at the end.

If toning, use Balance Plus V3 in between colours for 5 minutes and Balance Plus PLATINUM for 10 minutes at the end.

Take Note

Never use higher quantities of ReBond V3 than those indicated. Excess ReBond V3 may reduce the effectiveness of the bleach or hair colour.

1. Cleanse twice with Fabriq Zero or PURIFY. If required, leave on for 5 minutes and cover with a cap. Rinse and gently towel dry.
2. Apply 4-10 pumps of Foam V3, massage through hair, cover with a cap and leave for 10 minutes.
3. Rinse
4. Gently towel dry, apply Fabriq Regulate and continue with Reset as usual.

1. Cleanse twice with PURIFY. Rinse and gently towel dry.
2. Apply 4-10 pumps of Foam V3, massage through hair. Cover with a cap and leave for 10 minutes.
3. Without rinsing, apply Balance Plus V3 (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes.
4. Rinse and style as required with Elixir V3 and styling products.

No Foam V3 yet?

While Foam V3 is a much better way to "Stand-Alone", don't worry, you can still give the benefits of the Stand-Alone Treatment using ReBond V3 and Balance Plus V3 (or Balance Plus PLATINUM if toning).

Here's how...

1. Cleanse twice with PURIFY. Rinse and gently squeeze the moisture out.
2. Dilute ReBond V3 with warm water in an applicator bottle in a ratio of 1 part ReBond V3 to 6 parts water:Short Hair – 5 ml ReBond V3 to 30 ml water.Medium Hair - 10 ml ReBond V3 to 60 ml water.Long Hair – 15 ml ReBond V3 to 90 ml water.
3. Apply diluted ReBond V3 throughout the hair (at the basin), saturating thoroughly. Leave on for 10 minutes.
4. Without rinsing, apply 10 ml Balance Plus V3 (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes.
5. Rinse and style as required with Elixir V3 and styling products.

"I love that INNOluxe has now made V3, incorporating scientific advances, they never stand still and we can get EVEN better results"

— Sandy Wood, Sandy Wood @sandywood_hair

1. Shampoo with PURIFY and rinse.
2. Towel dry gently.
3. Apply 4-10 pumps of Foam V3, massage through hair, cover with a cap and leave for 10 minutes.
4. Rinse.
5. Follow manufacturer's instructions and timings with application, development & neutralising of straightening treatment.
6. Repeat stage 3, apply Foam V3 onto towel-dried hair. Leave on for 10 minutes.
7. Without rinsing, apply Balance Plus V3 (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes.
8. Rinse and style as required with Elixir V3 and styling products.

1. Shampoo with recommended shampoo and rinse.
2. Towel dry gently.
3. Apply 4-10 pumps of Foam V3, massage through hair, cover with a cap and leave for 10 minutes.
4. Rinse.
5. Follow manufacturer's instructions and timings with application & development of the suitable straightening solution.
6. Rinse & Shampoo with recommended shampoo, rinse again.
7. Dry & Iron, following manufacturer's instructions.
8. Neutralise, following manufacturer's instructions.
9. Repeat stage 3, apply Foam V3 on to towel dried hair, cover with a cap and leave on for 10 minutes.
10. Without rinsing, apply Balance Plus V3 (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes.
11. Rinse and style as required with Elixir V3 and styling products.

1. Shampoo with Pro Classics Pré-Forme shampoo and rinse.
2. Towel dry gently.
3. Apply 4-10 pumps of Foam V3, massage through hair, cover with a cap and leave for 10 minutes.
4. Rinse.
5. Follow manufacturer's instructions and timings with application & development of X-Tenso Moisturist.
6. Rinse. Dry & Iron if applicable.
7. Neutralise (following manufacturer's instructions).
8. Repeat stage 3, apply Foam V3 on to towel-dried hair, cover with a cap and leave on for 10 minutes.
9. Without rinsing, apply Balance Plus (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes.
10. Rinse and style as required with Elixir V3 and styling products.

1. Add 3 ml of ReBond V3 per 100 ml of ready mixed relaxer.
2. Apply and develop relaxer according to manufacturer's instructions.
3. Rinse hair, shampoo and apply Balance Plus V3 (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes before rinsing.
4. Finish as required with Elixir V3 and styling products.

1. Shampoo if required
2. Soften the hair according to manufacturers instructions
3. Rinse/shampoo
4. Apply 4-10 pumps of Foam V3, massage through hair, cover with a cap and leave for 10 minutes.
5. Rinse
6. Perm & Neutralise following manufacturers instructions
7. Repeat stage 3, applying 4-10 pumps of Foam V3 on to towel-dried hair, massage through and leave for 10 minutes.
8. Without rinsing, apply Balance Plus V3 or Balance Plus PLATINUM. Comb through and leave for 10 minutes.
9. Rinse and style as required with Elixir V3 and styling products.

1. Shampoo twice with recommended PURIFY.
2. Towel dry gently.
3. Apply 4-10 pumps of Foam V3, massage through hair and leave for 10 minutes. Cover with a cap.
4. Rinse and perm, following the manufacturer's instructions.
5. Neutralise, following the manufacturer's instructions.
6. Repeat stage 3, applying 4-10 pumps of Foam V3 on to towel-dried hair, massage through and leave for 10 minutes.
7. Without rinsing, apply Balance Plus V3 or Balance Plus PLATINUM. Comb through and leave for 10 minutes.
8. Rinse and style as required with Elixir V3 and styling products.

"The science behind INNOluxe is absolutely mindblowing, it makes me extremely confident to perm over coloured hair, and even bleached hair."

— Sarah Spiers - Educator @chaulkeducation

1. Cleanse twice with the manufacturer's recommended clarifying shampoo, following manufacturer's guidelines. Rinse and gently towel dry.
2. Apply 4-10 pumps of Foam V3, massage through hair, cover with a cap and leave for 10 minutes.
3. Rinse
4. Continue the Keratin Service, following manufacturer's guidelines.

Always mix your colour and developer, according to the manufacturer's instructions, before adding ReBond V3. Measure the amount of ReBond V3 based on the amount of colour only, not colour and developer.

1. Mix your colour with your developer.
2. Add 1 ml of ReBond V3 for every 10 g of colour (not including the amount of developer).
3. Apply and develop as usual.
4. Rinse hair, shampoo and apply Balance Plus V3 (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes before rinsing.
5. Finish as required with Elixir V3 and styling products.

Take Note

Never use higher quantities of ReBond V3 than those indicated. Excess ReBond V3 may reduce the effectiveness of the bleach or hair colour.

Including High Lift

Always mix your colour and developer, according to the manufacturer's instructions, before adding ReBond V3. Measure the amount of ReBond V3 based on the amount of colour only, not colour and developer.

1. Mix your colour with your preferred developer.
2. Add 1 ml of ReBond V3 for every 10 g of colour (not including the amount of developer).
3. Apply and develop as usual.
4. Rinse hair, shampoo and apply Balance Plus V3 (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes before rinsing.
5. Finish as required with Elixir V3 and styling products.

Take Note

Never use higher quantities of ReBond V3 than those indicated. Excess ReBond V3 may reduce the effectiveness of the bleach or hair colour.

Always mix your colour and developer, according to the manufacturer's instructions, before adding ReBond V3. Measure the amount of ReBond V3 based on the amount of bleach only, not bleach and developer.

Off scalp & on Scalp

1. Mix your bleaching powder or crème with the developer. Add ReBond V3 in ratios of 6 ml per 30 g of bleach (1:5 ratio, not including the amount of developer).
2. Apply and develop as usual.
3. Rinse hair, shampoo and apply Balance Plus V3 (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes before rinsing.
4. Finish as required with Elixir V3 and styling products.

Take Note

Never use higher quantities of ReBond V3 than those indicated. Excess ReBond V3 may reduce the effectiveness of the bleach or hair colour.

"V3 helps massively with irritation when you’re using bleach on the scalp. My clients have said it's so much more comfortable than previous experiences."

— Conor Stansfield, Not Another Salon @notanothersalon

1. Add 1 ml of ReBond V3 for every 10 g of Elumen colour
2. Apply and develop as usual.
3. Rinse thoroughly without emulsifying. Shampoo twice and apply Elumen Lock for 5 minutes.
4. Rinse hair and apply Balance Plus V3 (or Balance Plus PLATINUM if toning). Comb through and leave for 10 minutes before rinsing.
5. Finish as required with Elixir V3 and styling products.